Drilling Rigs & Equipment Auction
Extensive Range of Geothermal Drilling Rigs and Equipment - Please Note: Lots 14 & 23 are at different location, details in lot listings
Ended: 20th July 2011 14:00
- Hutte (2007) Model 205GT Geothermal Tracked Rotary Drilling RigWith Type 300 Drill Mast - Eurodrill CDH2400 Compact Double Drilling Head. S/No 900064. With Eurodrill Preventor System for Double Head Operation. Hutte S/No: H205ZX0127Sale has ended
- Casagrande (2005) C6 Perforatrice Geothermal Tracked Rotary Drilling RigTracked piling rig weighing 13500kg. 2522 recorded hours. 4 jaw vice fitted. Ground pressure 60N/cm2. Designed for augering to 450mm diameter, wireline coring, traditional coring and down the hole (DTH) to 300mm width. S/No C6ZC0859Sale has ended
- Casagrande (2006) C4 Perforatrice Geothermal Tracked Rotary Drilling RigTracked piling rig weighing 7900kg in standard format. 1486 recorded hours. Complete with 2 off remote control units. 4 jaw vice fitted. Ground pressure 7,6N/cm2 29N/cm2 in working configuration. Serial Number: C4ZS0138Sale has ended
- Comacchio (2007) Geo 205 Geothermal Tracked Rotary Drilling RigWith Kubota 4 cylinder diesel engine providing 31kw power output. 1810 recorded hours. 4 jaw vice/pipe clamp fitted. S/No 0903. With Remote Control UnitSale has ended
- Comacchio (2006) Geo 205 Geothermal Tracked Rotary Drilling RigYOM circa 2006. SN 0832. With Kubota 4 cylinder diesel engine providing 31kw power output. 4 jaw vice/pipe clamp fitted.Sale has ended
- Fraste ML with Ripamonte Speedy Drill Mast, Excavator Mounted Rotary DrillFits to digging boom of any existing suitable sized excavator. Enables drillng at any angle for rotary coring or rotary percussive drillng.Sale has ended
- Fraste (2005) ML with Ripamonte Speedy Drill mast, excavator Mounted Rotary Drill - Light Weight VersionManufactured 1.5 metre stroke mast to allow drilling from tracked excavator to include quantity of hydraulic hoses and pressure/flow control units. NB: Previoulsy used in conjunction with Fraste ML excavator mounted unitSale has ended
- Pneumatic (2006) Rotary Drilling Rig Mounted on Messersi Tracked BarrowCustom built unit for working in confined tunnels with air driven head on conventional mast. The unit is mounted on a Messersi tracked undercarriage with only 42 hours recorded on the undercarriage.Sale has ended
- Fraste (2003) Multidrill (PL) Tracked Rotary Drilling RigMini piling machine with kubota engine. 4 jaw pipe clamp/vice fitted. Recorded Hours 1996. S/No P030536Sale has ended
- Shell and Auger Towed Percussion Drilling UnitSale has ended
- Shell and Auger Towed Percussion Drilling UnitSale has ended
- Case (1996) Model 860 Topcutter Trenching MachineWith choice of 2 off cutting wheels Note: Location Different to Main AuctionSale has ended
- Turbosol (2007) Hydrotonic Pro-H Grout Pan / Screed MixerUnit on a towed chassis. From the Pro H series of mchines being model type DM. Powered by a 2 cylinder diesel engine with 277.2 recorded hours. S/No 391474Sale has ended
- Sonic Mud Cleaner UnitWater cleaning/recycling environmental control unit manufactured by Sonic. With water supply hosesSale has ended
- Sonic (2007) Mortar Mixing Pump UnitPowered by a SDMO T16k integral silenced skid mounted generator (was also used to power the Sonic mud cleaner unit). Mortar mixing is controlled by Kuchler Kmungg digital type flow control meter and is powered by a 4.2kw motor providing 48...Sale has ended
- Hatz Powered Screed / Mortar MixerTowed unit with Hatz silent pack power unit allowing for cement bags to be dropped into mixing hopper with pressure flow pumpingSale has ended
- Geomarc (2007) TR200 Pressurised Drill Water Supply Pump UnitPowered by Hatz Silent power pack the pump is on a towed chassis. S/No 779Sale has ended
- Geomarc (2009) TR7 200 Pressurised Drill Water Supply Pump UnitUnit is on a towed chassis powerd by Lombardini two cylinder engine. S/No 976Sale has ended
- Geomarc TR200 Pressurised Drill Water Supply Pump UnitYOM circa 2009 Powered by Hatz Silent Power Pack. Pump on a Towed ChassisSale has ended
- 2002 DAF 65.220 4x2 18tonne Rated Flat Bed LorryFitted with PM16 Crane Manufactured in 2006 SN: GA261436. Note: Location Different to Main AuctionSale has ended
- Image not availableLOT 24Spare LotSale has ended
- Image not availableLOT 25Spare LotSale has ended
- Image not availableLOT 26Spare LotSale has ended
- Image not availableLOT 27Spare LotSale has ended
- Image not availableLOT 28Spare LotSale has ended
- Image not availableLOT 29Spare LotSale has ended
- Image not availableLOT 30Spare LotSale has ended
- Image not availableLOT 31Spare LotSale has ended
- Spare LotSale has ended
- Image not availableLOT 33Spare LotSale has ended
- Image not availableLOT 34Spare LotSale has ended
- Image not availableLOT 35Spare LotSale has ended
- Image not availableLOT 36Spare LotSale has ended
- Image not availableLOT 37Spare LotSale has ended
- Image not availableLOT 38Spare LotSale has ended
- Image not availableLOT 39Spare LotSale has ended
- Image not availableLOT 40Spare LotSale has ended
- Image not availableLOT 41Spare LotSale has ended
- Image not availableLOT 42Spare LotSale has ended
- Image not availableLOT 43Spare LotSale has ended
- Image not availableLOT 44Spare LotSale has ended
- Image not availableLOT 45Spare LotSale has ended
- Image not availableLOT 46Spare LotSale has ended
- Image not availableLOT 47Spare LotSale has ended
- Image not availableLOT 48Spare LotSale has ended
- Image not availableLOT 49Spare LotSale has ended
- Image not availableLOT 50Spare LotSale has ended
- Tricone roller bit rock drilling head with Crown Cutter wheels, 16" ratedThe unit has a 16" working width with 3 off crown cutter heads. Believed to have been previously used on Hutte 205GT drilling rig. Overall length 2200mm with rod size of 115mmSale has ended
- Drill hole reamer unit, 16" ratedThe working width of the unit is 16" and it is understood that this equipment has previously been used in conjunction with the 16" drilling head as listed above, although can be used in conjunction with other suitable drill heads...Sale has ended
- Drilling tubesstillage of mixed sized tubes including 140mm, 90mm and 170mm sized pieces of assorted lengthsSale has ended
- Pallet of mixed drill pipe spanners & toolingPallet of assorted drill pipe spanners and associated toolingSale has ended
- Stillage of drilling tubes and rods8 off 3000mm length x 220mm drill tubes with 9no 3000mm x 90mm drill rodsSale has ended
- Quantity of Swivels, Reducers and BitsSale has ended
- Drillng tubes and core head22 off 1500mm x 140mm and 1no 2000mm x 140mm drilltube with core type cutting headSale has ended
- Drilling rods, tubes and fittingsApproximately 100no pieces of 1500mm drilling rods plus tubes and fittingsSale has ended
- Drilling RodsMixed stillage of 22 off x 3000mm x 90mm drill rods plus 35no 3000mm x 75mm drill rodsSale has ended
- Drilling tubes and rodsMixed stillage of approximately 180no rods and tubes at 1500mm approx plus core drill bitSale has ended
- Image not availableLOT 94Spare LotSale has ended
- Thirteen off Drill Tubes & Drill HeadsSale has ended
- Three off 2000mm x 110mm drill tube extractor unitsSale has ended
- Nine off 1500mm x 220mm tubesSale has ended
- Mixed tubes and rodsSale has ended
- Ten off mixed drills & rodsSale has ended
- Fourteen off mixed drill headsSale has ended
- Drilling tubes20 off 1500mm x 150mm OD drill tubes plus 30no 1000mm x 115mm OD drill tubesSale has ended
- Quantity of drilling rig spare partsSale has ended
- Quantity of drill spanners and toolsSale has ended
- Quantity of Mixed hydraulic pipes on palletSale has ended
- Drilling Rig SparesSale has ended
- 240mm approx rock drilling head with crown cutter wheelsSale has ended
- 180mm approx rock drilling head with crown cutter wheelsSale has ended
- 13 Off Core Drills, Rod Joints & Bits13 Off Core Drills, Rod Joints & Bits previuosly used with Comacchio GEO 205 RigSale has ended
- 2 Off Standard Flow/Speed Hydraulic Drive Motors2 Off Standard Flow/Speed Hydraulic Drive Motors, previously removed from Comacchio GEO 205 Drilling Rig (Lot 5)Sale has ended
- Pallet of shims and sundry itemsSale has ended
- Six off drill water induction manifoldsSale has ended
- Ten off mixed sized wire line adaptor units10 off units in total with 6no at 75mm and 4no at 55mm approximate working widthSale has ended
- Five off mixed sized wire line adaptor units5 off units ranging from 55mm - 95mm working width that appear to have had very little useageSale has ended
- Five off pumped water drill tube inlet manifold unitsSale has ended
- Pallet of mixed drilling sundriesSale has ended
- Hydraulic driven sludge/water pumpsPowered by Eaton hydraulic motors with 90mm approx outlet. 3no appear to be complete, 2no appear to require additional partsSale has ended
- SAV magnetic dill pipe/rod lifterManufactured in 2007 the device allows for easier manipulation of large sized tubes, casings and rodsSale has ended
- Image not availableLOT 130
- Pallet of mixed sized auger drill bits19 off in total ranging from75mm to 190mm approx working widthsSale has ended
- Assorted drilling tubes, Core Bits and Drill RodsQty of mixed sized tubes and drill heads ranging from 45mm to 100mm approx working widthsSale has ended
- Sumoto stainless steel DTH submersible borehole water pumpOverall length of 1900mm approx with diameter of 90mm approx. NB: power feed cables have been cut approximately 150m above the untSale has ended
- Two off 130mm OD drilling headsSale has ended
- Quantity of mixed drill spanners & toolingSale has ended
- Quantity of mixed drill spanners & toolingSale has ended
- Six off crates of mixed collets and wear sleevesSale has ended
- Two off drilling headsSale has ended
- Three off drilling headsSale has ended
- Three off drilling headsSale has ended
- Six off drilling headsSale has ended
- Eighteen off approx small sized drill tube adaptorsSale has ended
- Thirty Two off approx drilling bits & accessoriesSale has ended
- Four off mixed drill headsSale has ended
- Four off drill tube/rodmixed swivels attachmentsSale has ended
- Five off mixed drill tube/rod swivels attchmentsSale has ended
- Large sized plug buster type drill headSale has ended
- Two off drill headsSale has ended
- Large sized core drill bit, 220mm approx ODSale has ended
- Geothermal pipe line feeder unitDesigned for the feeding of geothermal piping down the drill hole the unit can be rotated on the base and features a hydraulic powered drive motorSale has ended
- Casappa towed hydraulic power pack unitThree phase powered by 15kva motor the unit is on a towed chassisSale has ended
- Extremely high pressure washer unit, 5000psi ratedSkid mounted unit consisting of Harben 8.20 type pump powered by Teco 30kw motor designed to work at 1250rpm delivering up to 5000psi/ 345BAR. Complete with hoses and lanceSale has ended
- Two off drill pipe lifting/pull back head attachmentSale has ended
- Two off 120mm approx OD drilling headsSale has ended
- Drilling head - 140mm approx ODSale has ended
- Drilling head - 140mm approx ODSale has ended
- Drilling head - 140mm approx ODSale has ended
- Six off mixed sized drill heads 70mm to 90mm approx ODSale has ended
- Four off drilling heads 110mm approx ODSale has ended
- Two off drilling heads 140mm approx ODSale has ended
- Two off drilling heads 140mm approx ODSale has ended
- Drilling head - 170mm approx ODSale has ended
- Two off drilling heads, 1 x 170mm and 1x 130mm approx ODSale has ended
- Four off drilling heads, 2x 120mm and 2x100mm approx ODSale has ended
- Tricone type crown wheel drilling head 170mm approx ODSale has ended
- Ticone type crown wheel drilling head 180mm approx ODSale has ended
- Tricone type crown wheel drilling head, 280mm approx ODSale has ended
- Drilling head, 240mm approx ODSale has ended
- Approximately 25 off assorted diamond faced reemers, bits and matrix bits2 x T2-56 diamond reamer shells DCRT2056, 2x type T2-76 impregnated bit, series 8 type, 2x type T2-76 surafce sets, 2x T2-76 diamond reamer shells.Sale has ended
- Approximately 25 off assorted diamond faced core bits, reamer shells and drilling bits2 x T2-76 impregnated bits, series 8, 2x Atlas Copco Craelius SC10, 1 x tool size T2-56 imprenated core bit, 1x T2-76 surface sets, 2x Craelius SC2, 1x T2-76 impregnated bit, 1x T2-76 diamond reamer shell.Sale has ended
- Two off 150mm core drill bitsSale has ended
- Two off SK6LI46535SF core drill bitsSale has ended
- Two off SK6LI46 Maxset Cubic R type core drill headsSale has ended
- Eleven off pieces of cutting bits and liner sets4x Red 8 heads, 4x 85mm cutting bits, 3x TC 100mm liner setsSale has ended
- Twelve off pieces of core and drill bits etc1x HQ 90mm casing shoe, 1x 55mm drill bit, 2x #9 core bit for Ultra & Very hard fine grain formations 75mm approx OD, 1x Atlas CopcoSale has ended
- Twelve off pieces of core and drill bits, reamers, wear sleeves, etc2x 140mm reaming shells, 2 x 75mm reaming shells, 1x Diamond Boart 75mm core drill, 2x 120mm core drills, 1 x 75mm, 1x85mm, 1 x 115mm core drillsSale has ended
- Twenty Four off core drill bits12x 100mm, 3x 75mm, 2x 65mm,5x 55mm and 1x140mm OD approxSale has ended
- Fifteen off core drill bits3x 140mm, 1x100mm, 1x90mm, 2x55mm, 1x 60mm, 2x45mm, 1x65mm, 1x145mm, 2x170mm, 1x1300mm OD approxSale has ended
- Twelve off core drill bits4x 145mm, 2x100mm, 1x95mm, 1x65mm, 1x75mm, 1x35mm, 1x55mm, 1x90mm approx ODSale has ended
- Tricone type Crown wheel cutter multi drill headAppears to have had very little use, 110mm approx ODSale has ended
- Telve off assorted tube reducer/ connection fittingsSale has ended
- Thirteen off assorted tube reducer/ connection fittingsSale has ended
- Nineteen off assorted tube reducer/ connection fittingsSale has ended
- Eight off assorted tube reducer/ connection fittingsSale has ended
- Eight off mixed sized tapered end joints/connectorsSale has ended
- Twenty Three assorted drill tube joints/connectorsSale has ended
- Twenty Five assorted drill tube joints/connectorsSale has ended
- Thirty Two off assorted drill tube joints/connectorsSale has ended
- Specialist drilling attachmentSale has ended
- Two off specialist drilling attachmentsSale has ended
- Specialist drilling attachmentSale has ended
- Three off specialist drilling attachmentSale has ended
- TH6 backendSale has ended
- Qty of mixed wire line flanged tubesSale has ended
- Four off specialist drill tube adaptorsSale has ended
- Three off specialist drill tube adaptersSale has ended
- Twenty Five off assorted drilling & coring accessoriesSale has ended
- Drill water supply induction manifoldSale has ended
- Bean EO4130 hydraulic driven water pump25 psi rated, max speed 700rpm, 12.9hp, sn:11120186Sale has ended
- Hypro model 5330C-RX Air Drive Pump 500PSI max ratingMaximum speed of 1800rpm, serial number 07018-10009Sale has ended
- Two off drill water feed cyclone unitsSale has ended
- Drill water feed cyclone unitSale has ended
- Image not availableLOT 223Spare LotSale has ended
- Image not availableLOT 224Spare LotSale has ended
- Image not availableLOT 225Spare LotSale has ended
- Image not availableLOT 226Spare LotSale has ended
- Image not availableLOT 227Spare LotSale has ended
- Image not availableLOT 228Spare LotSale has ended
- Image not availableLOT 229Spare LotSale has ended
- Image not availableLOT 230Spare LotSale has ended
- Atlet 160STFS 450XSN battery powered warehouse forklift truckAtlet 160STFS 450XSN Battery powered forklift manufactured in 1989. Designed for seated operation. Features drop down stabiliser legs. Serial Number: XSN-8139SSale has ended
- <